This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

bq34z100-G1配置问题

Other Parts Discussed in Thread: BQ34Z100-G1, BQSTUDIO

我现在手里有一块bq34z100-G1的评估板,还有对应的开发套件,由于这款芯片以前没用过,现在第一次配置,但是如今显示出来的效果看起来有点没对,想问问大家这样的配置对不对。

四串电池,单个4.2V 2600mAH

现在显示出来的效果是这样的,FCC只有973ma,不知道为什么会这样。

链接好硬件以后,在data memory中我大概配置了以下的地方。

1.configruation——Data   serial Number = 4

2.configruation——Data 

    cell charge votlage T1-T2= 4200

   cell charge votlage T2-T3= 4200

   cell charge votlage T3-T4= 4200

  Design Capacity = 2600

  Design Energy= 9600

3.register——Number  of seres cell = 4

  register——pack  configruation 的VOLSEL设置为1

4.Calibration——Voltage Divider= 4200*4= 16800mv

 除了这些以外,请问各位还有什么是必须设置的吗?

datasheet 50页哪里我也看过了,有点没看懂,请用过的朋友帮帮忙!感激不尽