This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
BQ3060通过EV2300怎么把PRES引脚设置为0
通过外部接线到P-
电路的外部已经接地但还是显示PRES处于1状态
PRES已经接地,蛋EV2300软件上PRES还是处于1状态
PRES已经接地,但EV2300软件上PRES还是处于1状态
大家都搞反了。PRES pin接地,PRES bit为1,即红色。PRES pin浮空,PRES bit为0。