Spec. (ZHCSEK2B): 全部电芯的总转换时间 2.4ms(标称值),请问2.4ms如何计算? 暂存器设定条件为何?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Spec. (ZHCSEK2B): 全部电芯的总转换时间 2.4ms(标称值),请问2.4ms如何计算? 暂存器设定条件为何?
这个跟你具体的配置有关。
Hi Hugo,
感谢你的详细说明, 针对回覆内容仍有些疑问请跟您讨论, 请看下列说明:
1. ADC sample period for oversamples, 你在文章中提到设定CMD_OVS_GPER=12.6这里好像有误, 请看Spec.(SLUSC51B) page25 Table2, ADC 采样只能用CMD_OVS_HPER, 并且手册上也提到 "if CMD_OVS_CYCLE = 0, then the oversample period for the Cell channels is set by bits CMD_OVS_HPER", 所以关于这一点究竟是不是我误解了
2. 依照回覆内容的采样时间计算方式, 正常侦测循环下(非开机上电状态), pl455电池电压采样所需时间=(12.6 x 7) x 16 = 1.411ms请问我的理解是否正确?
3. 请问pl455这么多自检测功能中, 是否有检测采样时间的方法?