This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ34Z100-G1铅酸电池的学习过程问题请教

Other Parts Discussed in Thread: BQ34Z100-G1
您好,
    针对BQ34Z100-G1的铅酸电池学习过程,我想咨询一个问题:
在充电的过程中,要求充电到full,即FC is set;
但是在Achieving The Successful Learning Cycle这个文档中,要求的要严格一些,详见附件截图
1.我想请问一下,在参数设置中,充电设备的电压值设置为54V,但是已经有3天的充电了,一直没有达到;
充电电流的taper current 设置为15,quit current设置为5,但是目前的参数为下图,详见附件截图
我想通过修改data memory中的参数来达到满足3个条件,但是现在在data memory里面更改充电电压和taper current的值,总是出现写不进去的情况,
我想保证此次充电成功,该采取什么措施呢?
能现在停止充电么?
谢谢!
期待您的回复,祝您工作愉快~
BQ34Z100-G1铅酸电池学习问题.docx