从NORMAL Mode切换到SHIP Mode后,按TS1激活和对地址0x04写入0x00都好像回不到NORMAL Mode,从bq76930读出来的电压数据始终不对,想请问怎么才能回到NORMAL Mode,回到初始激活的正常工作状态。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
从NORMAL Mode切换到SHIP Mode后,按TS1激活和对地址0x04写入0x00都好像回不到NORMAL Mode,从bq76930读出来的电压数据始终不对,想请问怎么才能回到NORMAL Mode,回到初始激活的正常工作状态。
To get the part of SLEEP into Active mode, the bq76930 requires an external "wake pulse" (>1V))on the TS1 Pin on the bottom group. The boot sequence and the voltage after the BOOT on TS1( >1V)--CAP1--> REGOUT--SCLK-->CAP2--CAP3.
For the device to be commanded via the I2C into SLEEP mode by the controller; The device needs a 2 register write [SHUT_A, SHUT _B]= [0,1], [SHUT_A, SHUT _B]= [1,0]