实验中用到了该AD,希望用过的分享一些经验。如果有官方的或者可以分享的程序,还希望得到帮助
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
你好,
请问你们现在有相关的硬件平台吗?
你们计划配合处理器还是FPGA使用呢?这个应用笔记是关于其接口时序的一些介绍,可以看一下:
http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=slaa629&fileType=pdf
另外,这边有 ADS8568EVM-PDK 的FPGA 源码,可以作为参考:ftp://ftp.ti.com/pub/data_acquisition/ADCPro2/Source/
解压密码请编辑以下信息发送至邮件 pa_software_request@list.ti.com 申请
Name (of requester)*: <your name>
Requested software source*: <device name>
Application: <your intended application>
Preferred contact email*: <email address> (if it differs from the email address used for sending. NOTE: This will be the email address where the instructions on retrieving the software will be sent.)
详情参见: http://e2e.ti.com/support/data_converters/precision_data_converters/f/73/t/254854.aspx
谢谢!
你好,可以问你一些ADS8568,软件模式,并行接口下,怎么配置可以使ad正常工作吗,芯片资料都看过了,外部设置也都是按照芯片资料上给的,但是ad就是不能正常工作。
关键在于它的控制及数据读取时序图,数据手册里面有详细的介绍,建议用示波器观察各个控制信号,是否和数据手册上的一致。
即使只用1、2个通道,ADS8568也需要把8个通道全部读一遍的。
这个问题太具体,不在现场不好讲。
建议你根据PDF上的时序图,将一些关键的控制信号输出,看看是哪里跟PDF上的要求不一致。