This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ISO7231M使用问题咨询

Other Parts Discussed in Thread: ISO7231M

各位老师,好!

         在使用ISO7231M时出现以下异常情况,示意图如下:

         

         有三种情况:1、INB输入有高低变化时,OUTB始终为高,50片出现两例。

                                 2、上电出现7231发热,LED灯微亮。测得INB引脚电压1.8V,OUTB引脚电压1.4V。重新上电正常,50片出现1例

                                3、上电7231不发热,LED灯微亮,重新上电正常。未测量此时电压。共出现3例。

          以上都未用示波器观察具体波形。但下来测试时,做了一个实验:用直流稳压电源从0V至3.3V上调(串接了1K电阻)输入至INB引脚,发现在1.2v-2.1V区间,INB引脚振荡。

          请各位老师帮忙分析下可能存在的原因,谢谢!