在实际测试中,我直接调节ISETA的电压来控制输出电流,通过电子负载直接读出实际输出电流,如何去设置这个电流值? ISETA Voltage电压如何得到?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,johnsin
还有个问题,
IOUT1=Vcs1/200+25uA ,IOUT2=Vcs2/200+25uA这两个电流计算出来的是uA级的,如何转换成A级电流的?
Hi,Johnsin,
我这边还有个问题,从datesheet中看到计算Iout1和Iout2电流如下;
Iout1=Vcs1/200+25uA, Iout2=Vcs2/200+25uA,这个uA级如何转换为A级电流的?
为何在“PMP15038 Test Results”上说的精度可以到0.004% of full scale current和The differential is much lower than 0.5mV?