This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5101驱动器,在电源开启时突然LM5101就坏了

Other Parts Discussed in Thread: LM5101

在电源开发中,使用LM5101驱动器,效率、纹波等已经测试完毕(老化1小时),在一次关闭重启时,突然电源不工作了,检查是LM5101驱动器工作电流变大,大约100ma以上,发烫、vcc电压低,整个电源不工作,换了驱动器。以为是偶然现象。先后换了两片,开始都能正常工作,多次断电重启时还是重复上面的故障。查不出原因。

请问一下,对驱动器的信号输入引脚(HI和LI)有什么电压要求?LM5100和LM5101有什么区别?TLL和cmos电平要求能用吗?