TMS320C5515汇编语句报错

#include <stdio.h>
#include "data_types.h"
#include "register_system.h"
#include "register_cpu.h"
#include "rtc.h"
#include "control.h"
#include "i2s.h"
#include "dma.h"
#include "timer.h"
#include "lcd.h"
#include "sar.h"
#include "usbstk5515.h"
#include "usbstk5515_led.h"

void InitSystem(void);
void ConfigPort(void);
void SYS_GlobalIntEnable(void);
void SYS_GlobalIntDisable(void);
void BlinkLED(void);
void GenerateAudioTone(void);

Uint16 fSineWave = 0;
Uint16 f1KToneOn =0;
Uint16 f2KToneOn =0;

extern Uint16 fTimer;
extern Uint16 Flag_RTC;
extern Uint16 Conunt_RTC;
extern Uint16 halfSecCnt;
extern void AIC3254_init(void);
extern Int16 oled_test();

void main(void)
{
 Uint16 temp, key, i;
 
   
    InitSystem();
    ConfigPort();

    SYS_GlobalIntEnable();
   
    IER0 = 0x0010;      // enable timer int     
    IER1 = 0x0004;      // enable RTC int
    Timer0Init();
 reset_RTC();
 enable_rtc_second_int();

 AIC3254_init();
 set_i2s0_slave();
    enable_i2s0();
 StartTimer0();
 
 SYS_EXBUSSEL = 0x6100;  // Configure External bus
 oled_test();             // Set display
 USBSTK5515_ULED_init( ); // Configure user LEDs
    Init_SAR();              // Initialize SAR for switches
    USBSTK5515_ULED_setall( 0x00 );
   
    while(1)
    {
  //*(ioport volatile unsigned *)0x0001 = 0x03FF;
  //asm(" idle");

        BlinkLED();
  GenerateAudioTone();
#if 1  
  for ( i = 0 ; i < 4 ; i++ )
        {
            USBSTK5515_ULED_on( i );       // Turn on user LED i
            USBSTK5515_waitusec( 50000 );
        }
        for ( i = 0 ; i < 4 ; i++ )
        {
            USBSTK5515_ULED_off( i ); // Turn off user LED i
            USBSTK5515_waitusec( 50000 );
        }
#else
  /* Get Switch values an toggle LEDs accordingly */
     key = Get_Sar_Key();
     if((key == SW1))   // If SW1 pressed
     {
      USBSTK5515_ULED_toggle( 0 );  // Toggle DS2 (GREEN LED)
     }
     if((key == SW2))   // If SW2 pressed
     {
      USBSTK5515_ULED_toggle( 3 );  // Toggle DS5 (BLUE LED)
     }
     if((key == SW12))   // If SW1 and SW2 pressed
     {
      USBSTK5515_ULED_toggle( 1 );  // Toggle DS3 (RED LED)
      USBSTK5515_ULED_toggle( 2 );  // Toggle DS4 (YELLOW LED)
     }
#endif
 }

}

void InitSystem(void)
{
 Uint16 i;
// PLL set up from RTC
    // bypass PLL
    CONFIG_MSW = 0x0;

#if (PLL_100M ==1)
    PLL_CNTL2 = 0x8000;
    PLL_CNTL4 = 0x0000;
    PLL_CNTL3 = 0x0806;
    PLL_CNTL1 = 0x82FA;
   
#elif (PLL_12M ==1)
    PLL_CNTL2 = 0x8000;
    PLL_CNTL4 = 0x0200;
    PLL_CNTL3 = 0x0806;
    PLL_CNTL1 = 0x82ED;
#elif (PLL_98M ==1)   
 // 98.304 MHz
    PLL_CNTL2 = 0x8000;
    PLL_CNTL4 = 0x0000;
    PLL_CNTL3 = 0x0806;
    PLL_CNTL1 = 0x82ED;
   
#endif

    while ( (PLL_CNTL3 & 0x0008) == 0);
    // Switch to PLL clk
    CONFIG_MSW = 0x1;

// clock gating
// enable all clocks
    IDLE_PCGCR = 0;
    IDLE_PCGCR_MSW = 0xFF84;
   

// reset peripherals
    PER_RSTCOUNT = 0x02;
    PER_RESET = 0x00fb;   
    for (i=0; i< 200; i++);
   
}

void ConfigPort(void)
{
    //  configure ports
    PERIPHSEL0 = 0x6900;        // parallel port: mode 6, serial port1: mode 2, serial port0: mode1
   
}

void SYS_GlobalIntEnable(void)
{
    asm(" BIT (ST1, #ST1_INTM) = #0");
}

void SYS_GlobalIntDisable(void)
{
    asm(" BIT (ST1, #ST1_INTM) = #1");
}

static toggleLED(void)
{
 Uint16 temp;

    temp = ST1_55;
    if((temp&0x2000) == 0)
    {
        // turn on LED
        temp |= 0x2000;
    }
    else
    {
        // turn off LED
        temp &=0xDFFF;
    }
    ST1_55 = temp;

}

void BlinkLED(void)
{
#if 1
 if(fSineWave==1)
 {
     if(Flag_RTC ==1)
  {
        Flag_RTC =0;
   toggleLED();
  }
 
 }
 else
 {
     if(fTimer ==1)
  {
        fTimer =0;
   toggleLED();
  }
 }

#else
    if(Flag_RTC ==1)
 {
      Flag_RTC =0;
  toggleLED();
 }
#endif
}

void GenerateAudioTone(void)
{
 if(Conunt_RTC < 10)
 {
  if(f1KToneOn ==1)
   return;
  // 1KHz sine wave
  fSineWave = 1;
  f1KToneOn =1;
  f2KToneOn =0;
        set_dma0_ch0_stop();
     set_dma0_ch1_stop();
        set_dma0_ch0_i2s0_Lout();
     set_dma0_ch1_i2s0_Rout();
 }
 else if (Conunt_RTC < 20)
 {
  if(f2KToneOn ==1)
   return;
  // 2KHz sine wave
  fSineWave = 0;
  f1KToneOn =0;
  f2KToneOn =1;
        set_dma0_ch0_stop();
     set_dma0_ch1_stop();
        set_dma0_ch0_i2s0_Lout();
     set_dma0_ch1_i2s0_Rout();
 }
 else
 {
  Conunt_RTC =0;
  f1KToneOn =0;
  f2KToneOn =1;

 }
}

以上例程。并且加入vector.asm，涉及中断的文件就会报错。