我用的TMS320C6748芯片，原本CMD文件把所有的section定义在SHRAM中，但是在执行一段数据处理程序的时候，总是自动退出，即exit.c中的abort()程序，我查了一下可能是程序运行RAM不够，然后我把所有的section定义在DDR2中，但是程序能够执行但是无法正常执行，同时还有很多编译警告。如下，
warning #10281-D: Section ".bss" requires a STATIC_BASE relative relocation, but is located at 0xc0647200, which is probably out of range of the STATIC_BASE. STATIC_BASE is located at 0xc0638bf8. Might be required to correct placement of ".bss" so it lies within 0x8000 of the STATIC_BASE.
warning #10281-D: Section ".neardata" requires a STATIC_BASE relative relocation, but is located at 0xc0647220, which is probably out of range of the STATIC_BASE. STATIC_BASE is located at 0xc0638bf8. Might be required to correct placement of ".neardata" so it lies within 0x8000 of the STATIC_BASE.
warning #10281-D: Section ".bss" requires a STATIC_BASE relative relocation, but is located at 0xc0647200, which is probably out of range of the STATIC_BASE. STATIC_BASE is located at 0xc0638bf8. Might be required to correct placement of ".bss" so it lies within 0x8000 of the STATIC_BASE.
warning #10281-D: Section ".neardata" requires a STATIC_BASE relative relocation, but is located at 0xc0647220, which is probably out of range of the STATIC_BASE. STATIC_BASE is located at 0xc0638bf8. Might be required to correct placement of ".neardata" so it lies within 0x8000 of the STATIC_BASE.
请问一下如何解决？急求！！
