我使用DM8168板子 开机启动时 偶尔会出现卡死情况 不只是什么原因，正在查找，请问有没有建议
U-Boot 2010.06 (Jan 17 2017 - 18:46:34)
TI8168-GP rev 2.1
HDVICP clk : 600MHz
L3 Fast clk : 560MHz
HDVPSS clk : 280MHz
Ducati M3 clk : 280MHz
DSP clk : 1000MHz
ARM clk : 987MHz
DDR clk : 675MHz
I2C: ready
DRAM: 2 GiB
NAND: HW ECC BCH8 Selected
512 MiB
MMC: OMAP SD/MMC: 0
zigsun:8003
LEVEL:micron
EMIF0_PBBPR:0x30
Net: <ethaddr> not set. Reading from E-fuse
Detected MACID:84:7e:40:ef:fc:2
Ethernet PHY: GENERIC @ 0x01
DaVinci EMAC
Hit any key to stop autoboot: 0
Loading from NAND 512MiB 3,3V 8-bit, offset 0x580000
Image Name: Linux-2.6.37-2.0.0
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2981404 Bytes = 2.8 MiB
Load Address: c0008000
Entry Point: c0008000
## Booting kernel from Legacy Image at 81000000 ...
Image Name: Linux-2.6.37-2.0.0
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2981404 Bytes = 2.8 MiB
Load Address: c0008000
Entry Point: c0008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[kernel] Uncompressing Linux... done, booting the kernel.
