用的官方u-boot-2017.01+gitAUTOINC+9fd60700db-g9fd60700db 编译后SD卡启动,上电无论怎么配一些参数,调试串口一直没信息输出,调试串口用的是UART3,板子使我们自己的版,无board ID芯片。 编的LED程序是可以正常点亮和熄灭,请问如果自己配置UART3,需要配置哪些寄存器及其值是多少?然后串口可以正常工作
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
可以用仿真器跟一下,看看卡在社么地方了
有可能在检测BORAD ID信息后就退出了