This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

关于28335 adc 测量范围减小

Other Parts Discussed in Thread: CONTROLSUITE

各位好,想问个问题,我在用28335 adc时发现测量电压1V左右,ad输出就4096了,不懂为什么。外部参考电压都接地了,采用的是默认的内部参考电压。adclo也接地了。代码参见附件。

  • 你用TI的这个例程测试一下吧:

    C:\ti\controlSUITE\device_support\f2833x\v142\DSP2833x_examples_ccsv5\adc_soc

    另外对一下这个硬件:

    C:\ti\controlSUITE\development_kits\~controlCARDs\CC2833xHWdevPkg\F28335controlCARD HWDevPkg PGF [R1.0]

    ERIC

  • 这个应该是你没有配置好      如果AD口没选对或采集的不是你接的模拟量

    应该是中间值      建议你用万用表测一下地和你采集的AD口的电压值