This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

283377SPZPT 仿真器连接问题。

Other Parts Discussed in Thread: CONTROLSUITE

问题描述。

(1)仿真器连接不上->解决方法:改变Boot模式为wait。原因是XRS在重复复位。

(2)程序不运行->解决方法:

          运行示例程序,但发现无法执行InitSysCtrl(), 执行后仿真器立即断开。

          屏蔽此函数,程序可以运行,逻辑正常,本例程在RAM中运行。10M晶振已经起振动。

(3)根本问题是无法进行Flash运行,LAUNCHXL-F28377S 开发板自带的演示程序也不可以。

          自己的程序可以在LAUNCHXL-F28377S 开发板上实现Flash启动运行。

         仿真器为xds100v3 与xds200,现象一致。

         个人感觉InitSysCtrl()无法执行,是问题的关键。但不分析不出原因。奉上电源部分原理图,请各位大虾指点!谢谢。