This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR5969 I/O输出控制问题

Other Parts Discussed in Thread: MSP430FR5969

请教TI:

说明:上图的目的是通过P沟道MOS管控制VCCADC电源。VCCADC下面负载电流大约为10mA

我使用MSP430FR5969 的I/O口(P3.1口)低电平控制VADC_CTRL ,测试置I/O口低电平后(P3.1口)不能拉低。仍然为高电平。但是若将VCCADC下面负载完全去除(即VCCADC为空载)则置I/O口能置低电平。

同时,如果通过人工将I/O口(P3.1口)接GND,也正常(带上VCCADC下面负载电流大约为10mA)。因此请教TI,是不是需要设置I/O口的使用方法。

迫切等待答案~