SensorTag DevPack 如何安装？驱动XDS110如何安装？

我现在使用IAR ARM 7.4.05编译与下载，

但是下载的结果是：

Wed Oct 07, 2015 02:12:32: Loaded macro file: D:\Embedded Workbench ARM 7.405\arm\config\debugger\TexasInstruments\CC26xx.dmac
Wed Oct 07, 2015 02:12:32: Loaded macro file: D:\Embedded Workbench ARM 7.405\arm\config\flashloader\TexasInstruments\FlashCC26xx.mac
Wed Oct 07, 2015 02:12:59: Fatal error: Failed to connect to the XDS emulator (connect ICEPick)... (Error -260 @ 0x0) An attempt to connect to the XDS110 failed. The cause may be one or more of: invalid firmware update, invalid XDS110 serial number, or faulty USB connection. The firmware and serial number may
be updated using the xdsdfu utility found in the .../ccs_base/common/uscif/xds110 directory of your installation. View the ReadMe.txt file there for instructions. (Emulation package 6.0.14.4) Session aborted!
Wed Oct 07, 2015 02:12:59: Unloaded macro file: D:\Embedded Workbench ARM 7.405\arm\config\flashloader\TexasInstruments\FlashCC26xx.mac

请问，我该如何下载，与调试Code？

Ti的工程师呢？您们没见过这种问题吗？还是你们根本就不想回答我的问题？！

你的设备管理器显示的是Stellaris Device Firmware Upgrade，正常情况下是XDS110才对。首先注意这点：When using the CC-DEBUG-DEVPACK (XDS110 debugger) with the SensorTag 2.0 (CC2650STK), make sure the SensorTag battery is mounted before attaching USB.

然后请按以下步骤操作：

1) Connect the Devpack to PC and it should be in the mode of firmware upgrade mode.

2) Use the cmd tool to the path: D:\ti\ccsv6\ccs_base\common\uscif\xds110 【Select path according to your installation】

3) Run the following two commands:

xdsdfu -m

xdsdfu -s firmware.bin -r

@Viki Shi我安装你的方法操作了，还是不行？我电脑装的ccs 7.2.0

之前也有这个问题
CCS7.3.0.00019_win32.zip

后来发现安装时
除了点选 TI XDS Debug Probe Support
另外再多点选 SEEGER J-Link

就正常了
楼主可以试试看

祝好运