我zigbee用的是cc2530,移植的协议栈是1.2.2a。现在用仿真器连接zigbee开发板,用packet sniffer软件来抓包,按下开始之后弹出以下错误
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
我zigbee用的是cc2530,移植的协议栈是1.2.2a。现在用仿真器连接zigbee开发板,用packet sniffer软件来抓包,按下开始之后弹出以下错误
你的抓包板子有没有烧入抓包的固件?
C:\Texas Instruments\SmartRF Tools\Packet Sniffer\bin\general\firmware\sniffer_fw_cc2530.hex
SmartRF Packet Sniffer 2 includes software and firmware to capture and display over-the-air packets. The capture device is connected to the PC via USB. SmartRF Packet Sniffer 2 supports the CC13xx and CC26xx family of devices as capture device and uses Wireshark for packet display and filtering. The supported protocols are listed in the table below.
SmartRF Packet Sniffer 2 includes the following components:
The SmartRF Sniffer Agent is used to configure and communicate with the capture device and forwards packets to Wireshark. SmartRF Sniffer Agent runs on Windows 7 and Windows 10.
Features:
The table below shows the supported protocols and which HW platform to use:
Protocol | Capture device |
IEEE 802.15.4/ZigBee/Thread (2.4 GHz) | LAUNCHXL-CC2650 LAUNCHXL-CC26X2R1 |
IEEE 802.15.4ge (sub-1 GHz) | LAUNCHXL-CC1350 LAUNCHXL-CC1310 |
EasyLink (sub-1 GHz) | LAUNCHXL-CC1350 LAUNCHXL-CC1310 |
Installation recommendations:
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient way, with options for filtering and storage to a binary file format.
Features: